Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 30.11.2006
Component: Electrical System
Manufacturer: Nissan North America, Inc.
Description:
On certain king cab trucks, the wires in the harness were routed through the rear doors and into the body. these wires may break due to over bending of the harness as the door is opened and closed. the harness contains wires for the driver seat belt pretensioner and for the front passenger seat belt which is part of the occupant classification system. wires for the rear audio speakers are also contained n the harness.
Consequencs:
If the wires for the seat belts and speaker wires break and make contact, there is a possibility that the pretensioner may deploy. if this happens when the seat belt is retracted, it will not be possible to use the seat belt. if one of the wires on the right side harness for the seat belt tension sensor breaks, the passenger side front air bag will not deploy as designed in a frontal collision increasing the risk of a crash and personal injury.
Notes:
Dealers will replace the wire harness cover with a different type that prevents over bending of the harness and the harness will be rerouted free of charge. the recall began on february 19, 2007. owners may contact nissan at 1-800-647-7261.
Date: 30.11.2006
Component: Electrical System
Manufacturer: Nissan North America, Inc.
Description:
On certain king cab trucks, the wires in the harness were routed through the rear doors and into the body. these wires may break due to over bending of the harness as the door is opened and closed. the harness contains wires for the driver seat belt pretensioner and for the front passenger seat belt which is part of the occupant classification system. wires for the rear audio speakers are also contained n the harness.
Consequencs:
If the wires for the seat belts and speaker wires break and make contact, there is a possibility that the pretensioner may deploy. if this happens when the seat belt is retracted, it will not be possible to use the seat belt. if one of the wires on the right side harness for the seat belt tension sensor breaks, the passenger side front air bag will not deploy as designed in a frontal collision increasing the risk of a crash and personal injury.
Notes:
Dealers will replace the wire harness cover with a different type that prevents over bending of the harness and the harness will be rerouted free of charge. the recall began on february 19, 2007. owners may contact nissan at 1-800-647-7261.
Date: 30.11.2006
Component: Electrical System
Manufacturer: Nissan North America, Inc.
Description:
On certain king cab trucks, the wires in the harness were routed through the rear doors and into the body. these wires may break due to over bending of the harness as the door is opened and closed. the harness contains wires for the driver seat belt pretensioner and for the front passenger seat belt which is part of the occupant classification system. wires for the rear audio speakers are also contained n the harness.
Consequencs:
If the wires for the seat belts and speaker wires break and make contact, there is a possibility that the pretensioner may deploy. if this happens when the seat belt is retracted, it will not be possible to use the seat belt. if one of the wires on the right side harness for the seat belt tension sensor breaks, the passenger side front air bag will not deploy as designed in a frontal collision increasing the risk of a crash and personal injury.
Notes:
Dealers will replace the wire harness cover with a different type that prevents over bending of the harness and the harness will be rerouted free of charge. the recall began on february 19, 2007. owners may contact nissan at 1-800-647-7261.
Date: 28.10.2010
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2004-2006 armada, titan, infiniti qx56 and model year 2005-2006 frontier, pathfinder and xterra vehicles. the intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. the ecm relay may allow silicon vapor to form and, over time, the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing.
Consequencs:
This could cause engine stalling increasing the risk of a crash.
Notes:
Dealers will replace the ecm relay inside the ipdm assembly. this service will be performed free of charge. the safety recall began on december 6, 2010. owners may contact nissan at 1-800-647-7261.
Date: 28.10.2010
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2004-2006 armada, titan, infiniti qx56 and model year 2005-2006 frontier, pathfinder and xterra vehicles. the intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. the ecm relay may allow silicon vapor to form and, over time, the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing.
Consequencs:
This could cause engine stalling increasing the risk of a crash.
Notes:
Dealers will replace the ecm relay inside the ipdm assembly. this service will be performed free of charge. the safety recall began on december 6, 2010. owners may contact nissan at 1-800-647-7261.
Date: 28.10.2010
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2004-2006 armada, titan, infiniti qx56 and model year 2005-2006 frontier, pathfinder and xterra vehicles. the intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. the ecm relay may allow silicon vapor to form and, over time, the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing.
Consequencs:
This could cause engine stalling increasing the risk of a crash.
Notes:
Dealers will replace the ecm relay inside the ipdm assembly. this service will be performed free of charge. the safety recall began on december 6, 2010. owners may contact nissan at 1-800-647-7261.
Date: 27.06.2008
Component: Equipment > Air Conditioner
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling 180,664 my 2005-2006 titan, armada and infinity qx56 vehicles manufactured after march 17, 2005, that are equipped with a visteon air conditioning condenser fan motor. the fan motor may not be properly sealed allowing excessive water intrusion and inadequate drainage of moisture.
Consequencs:
This could cause corrosion in the motor leading possibly to overheating and a fire.
Notes:
Dealers will install a 'thermal protector kit' and test the air conditioning condenser fan motor and replace it if necessary. the recall began on august 2, 2008. owners may contact nissan at 1-800-647-7261.
Date: 27.06.2008
Component: Equipment > Air Conditioner
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling 180,664 my 2005-2006 titan, armada and infinity qx56 vehicles manufactured after march 17, 2005, that are equipped with a visteon air conditioning condenser fan motor. the fan motor may not be properly sealed allowing excessive water intrusion and inadequate drainage of moisture.
Consequencs:
This could cause corrosion in the motor leading possibly to overheating and a fire.
Notes:
Dealers will install a 'thermal protector kit' and test the air conditioning condenser fan motor and replace it if necessary. the recall began on august 2, 2008. owners may contact nissan at 1-800-647-7261.
Date: 08.03.2006
Component: Latches/locks/linkages > Doors > Latch
Manufacturer: Nissan North America, Inc.
Description:
Certain light trucks fail to comply with the requirements of federal motor vehicle safety standard no. 206, "door locks and door retention components." an arc weld is missing on some right side rear door upper latch assemblies.
Consequencs:
This may result in the right side doors coming partially open increasing the risk of injury to occupants.
Notes:
Dealers will replace the upper latch assembly free of charge. the recall began on april 3, 2006. owners may contact nissan at 800-662-6200.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
