Report for VIN JHMGD38668S058478

Overview

VIN: JHMGD38668S058478
Make: Honda
Model: FIT
Variant: Sport 5-Speed AT
Year: 2008

Vehicle history

History records: Get history report
User messages: View / add messages (0)
Recalls: View recalls (4)
Complaints:
Service bulletins:

Junk, salvage, damages

Check for collision, salvage, junk, total-loss, fire, hail, flood, rebuild, thief, odometer rollbacks, odometer readings, etc. records:

Technical specification

Bodytype: Hatchback
Doors: 4
Seats: 5
Engine ccm: 1500
Engine type: L4 SOHC 16V
Height (inch): 60.00
Width (inch): 66.20
Length (inch): 157.40
Steering: R&P
Anti-brake system: 4-Wheel ABS

Tyres and wheels

Front Rear
6Jx14 ET45 (175/65 R14) 6Jx14 ET45 (175/65 R14); 6Jx14 ET45 (175/65 R14)
6.5Jx15 ET45 (195/55 R15) 6.5Jx15 ET45 (195/55 R15); 6.5Jx15 ET45 (195/55 R15)
6Jx16 ET45 (185/55 R16) 6Jx16 ET45 (185/55 R16); 6Jx16 ET45 (185/55 R16)
8Jx16 ET45 (205/45 R16) 8Jx16 ET45 (205/45 R16); 8Jx16 ET45 (205/45 R16)
5.5Jx14 ET45 (175/65 R14) 5.5Jx14 ET45 (175/65 R14)
5.5Jx15 ET45 (175/65 R15) 5.5Jx15 ET45 (175/65 R15); 5.5Jx15 ET45 (175/65 R15); 5.5Jx15 ET45 (175/65 R15)
6Jx16 ET53 (185/55 R16) 6Jx16 ET53 (185/55 R16)

Fuel economy

Tank size (gallon): 10.80
Highway Mileage (miles/gallon): 33
City Mileage (miles/gallon): 27

Other information

Model year: 2008
Model period:
Manufacturer: Honda Motor Ltd., Japan
Place of assembly: Suzuka, Mia, Japan
Market:
WMI / VDS / VIS: JHM / GD3866 / 8S058478
Sequential number: 58478
VIN checksum: Valid

Vehicle recalls

Date: 15.12.2010
Component: Exterior Lighting > Headlights > High/low Beam Dimmer Switch
Manufacturer: Honda (american Honda Motor Co.)
Description:
Honda is recalling model year 2007-2008 honda fit vehicles. due to an error during installation of the wiring harness for the combination switch that controls low head beam function, the wires for the lower beam circuit were pulled tighter than intended. after repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.
Consequencs:
The low beam headlights can become inoperative decreasing the driver's visibility as well as the vehicle's visibility to other drivers, increasing the risk of a crash.
Notes:
Dealers will inspect the low beam terminal and perform necessary repairs free of charge. the safety recall began on january 24, 2011. owners may contact honda at 1-800-999-1009.
Date: 15.12.2010
Component: Exterior Lighting > Headlights > High/low Beam Dimmer Switch
Manufacturer: Honda (american Honda Motor Co.)
Description:
Honda is recalling model year 2007-2008 honda fit vehicles. due to an error during installation of the wiring harness for the combination switch that controls low head beam function, the wires for the lower beam circuit were pulled tighter than intended. after repeated use of the headlight switch, the electrical connector terminal for the low beam headlight circuit can become worn as a result of this tension, which can result in low conductivity and cause an accumulation of copper oxide in the area of the contacts.
Consequencs:
The low beam headlights can become inoperative decreasing the driver's visibility as well as the vehicle's visibility to other drivers, increasing the risk of a crash.
Notes:
Dealers will inspect the low beam terminal and perform necessary repairs free of charge. the safety recall began on january 24, 2011. owners may contact honda at 1-800-999-1009.
Date: 02.02.2010
Component: Visibility > Power Window Devices And Controls
Manufacturer: Honda (american Honda Motor Co.)
Description:
Honda is recalling certain model year 2007-2008 fit vehicles. under severe condition, water may enter the driver's window and reach the master power window switch. if the master power window switch is damaged as a result of the water intrusion, overheating and failure of the switch may result.
Consequencs:
An overheated switch can cause smoke, melting and fire.
Notes:
Dealers will inspect the switch and install a cover around the switch housing to prevent water from entering the switch. if the switch is damaged, the switch will be replaced and a cover will be installed. this service will be performed free of charge. the safety recall began on during march 19, 2010. owners may contact honda at 1-800-999-1009.
Date: 24.06.2013
Component: Visibility > Power Window Devices And Controls
Manufacturer: Honda (american Honda Motor Co.)
Description:
Honda is re-recalling certain model year 2007-2008 fit vehicles covered under previous recall 10v-033. the remedy applied in this earlier recall may have been insufficient. in the affected vehicles, over time, the plastic cover may separate from the master power window switch allowing water to enter the driver's window and reach the master power window switch. if the master power window switch is damaged as a result of the water intrusion, overheating and failure of the switch may result.
Consequencs:
An overheated switch can cause smoke, melting and fire.
Notes:
Honda will notify owners in july 2013 and will instruct owners to take their vehicles to dealers to have a free inspection conducted. if the switch is damaged, it will be replaced free of charge. if the switch is not damaged, the owner will be instructed to await a second notification that will instruct them to return to the dealer to have a replacement switch installed free of charge. honda anticipates it will have sufficient parts inventory to notify owners of vehicles with undamaged switches to return to dealers for replacement switches in fall 2013. renotification was sent out to owners on july 23, 2014. owners may contact honda at 1-800-999-1009. honda's recall number is ja6.
Show all recalls

Similar reports

Enter Your VIN and Get History Now:


Honda FIT, 2008: list of valid VIN codes