Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 09.10.2009
Component: Suspension > Front > Control Arm > Lower Ball Joint
Manufacturer: Qualis Automotive Llc
Description:
Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. the socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. the subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. the affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. the g10945 and g10946 are the same part as the d10945 and d10946 respectively. they are labeled differently depending on the aftermarket customer.
Consequencs:
Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Notes:
Qualis automotive will replace the ball joints free of charge. the safety recall began on november 9, 2009. owners may contact qualis automotive at 1-800-493-4128.
Date: 11.01.2010
Component: Service Brakes, Hydraulic
Manufacturer: Chrysler Group Llc
Description:
Chrysler is recalling certain model year 2010 chrysler sebring; dodge avenger and nitro; jeep liberty, commander and grand cherokee; and model year 2009-2010 dodge ram truck. these vehicles may have been built with an improperly formed or missing brake booster input rod retaining clip.
Consequencs:
This could result in brake failure without warning which could cause a crash.
Notes:
Chrysler will replace the brake booster input rod retaining clip free of charge. the safety recall is expected to begin during february 2010. owners may contact chrysler at 1-800-853-1403.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Date: 07.04.2009
Component: Exterior Lighting
Manufacturer: Sabersport
Description:
Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
Consequencs:
Decreased lighting visibility may result in a vehicle crash.
Notes:
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
