Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 16.12.1998
Component: Structure > Frame And Members
Manufacturer: Ford Motor Company
Description:
Vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
Consequencs:
If both rear corners drop, steering would become suddenly very difficult, affecting vehicle control and increasing the risk of a crash.
Notes:
Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Date: 26.02.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
Consequencs:
Driver control of vehicle speed using the speed control system or the accelerator control system would be diminished increasing the risk of a vehicle crash.
Notes:
Dealers will add a boot to the speed control cable.
Date: 26.02.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
Consequencs:
Driver control of vehicle speed using the speed control system or the accelerator control system would be diminished increasing the risk of a vehicle crash.
Notes:
Dealers will add a boot to the speed control cable.
Date: 26.02.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
Consequencs:
Driver control of vehicle speed using the speed control system or the accelerator control system would be diminished increasing the risk of a vehicle crash.
Notes:
Dealers will add a boot to the speed control cable.
Date: 26.02.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
Consequencs:
Driver control of vehicle speed using the speed control system or the accelerator control system would be diminished increasing the risk of a vehicle crash.
Notes:
Dealers will add a boot to the speed control cable.
Date: 26.02.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
Consequencs:
Driver control of vehicle speed using the speed control system or the accelerator control system would be diminished increasing the risk of a vehicle crash.
Notes:
Dealers will add a boot to the speed control cable.
Date: 25.02.1997
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
These vehicles are originally sold or currently registered in the following states: alaska, iowa, minnesota, nebraska, north dakota, and south dakota. the vehicles involved are 1992-1994 tempo/topaz vehicles with 3.0l engines; 1994 tempo/topaz with 2.3l engines; 1992-1995 taurus/sable with 3.8l engines; 1994-1995 taurus/sable with 3.0l engines and 1992-1994 lincoln continental vehicles with 3.8l engines. during high winds, heavy, blowing and drifting snow, and low temperatures, the engine cooling fan can become blocked or frozen with snow. the fan motor may not rotate and could overheat.
Consequencs:
This condition can cause smoke or flames from the fan and/or shroud, the fan electrical wiring, or the fan motor resulting in a vehicle fire.
Notes:
Dealers will install an electrical jumper harness containing an automatic resetting circuit breaker to protect the fan motor low speed circuitry from overheating.
Date: 25.02.1997
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
These vehicles are originally sold or currently registered in the following states: alaska, iowa, minnesota, nebraska, north dakota, and south dakota. the vehicles involved are 1992-1994 tempo/topaz vehicles with 3.0l engines; 1994 tempo/topaz with 2.3l engines; 1992-1995 taurus/sable with 3.8l engines; 1994-1995 taurus/sable with 3.0l engines and 1992-1994 lincoln continental vehicles with 3.8l engines. during high winds, heavy, blowing and drifting snow, and low temperatures, the engine cooling fan can become blocked or frozen with snow. the fan motor may not rotate and could overheat.
Consequencs:
This condition can cause smoke or flames from the fan and/or shroud, the fan electrical wiring, or the fan motor resulting in a vehicle fire.
Notes:
Dealers will install an electrical jumper harness containing an automatic resetting circuit breaker to protect the fan motor low speed circuitry from overheating.
Date: 25.02.1997
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
These vehicles are originally sold or currently registered in the following states: alaska, iowa, minnesota, nebraska, north dakota, and south dakota. the vehicles involved are 1992-1994 tempo/topaz vehicles with 3.0l engines; 1994 tempo/topaz with 2.3l engines; 1992-1995 taurus/sable with 3.8l engines; 1994-1995 taurus/sable with 3.0l engines and 1992-1994 lincoln continental vehicles with 3.8l engines. during high winds, heavy, blowing and drifting snow, and low temperatures, the engine cooling fan can become blocked or frozen with snow. the fan motor may not rotate and could overheat.
Consequencs:
This condition can cause smoke or flames from the fan and/or shroud, the fan electrical wiring, or the fan motor resulting in a vehicle fire.
Notes:
Dealers will install an electrical jumper harness containing an automatic resetting circuit breaker to protect the fan motor low speed circuitry from overheating.
Date: 25.02.1997
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
These vehicles are originally sold or currently registered in the following states: alaska, iowa, minnesota, nebraska, north dakota, and south dakota. the vehicles involved are 1992-1994 tempo/topaz vehicles with 3.0l engines; 1994 tempo/topaz with 2.3l engines; 1992-1995 taurus/sable with 3.8l engines; 1994-1995 taurus/sable with 3.0l engines and 1992-1994 lincoln continental vehicles with 3.8l engines. during high winds, heavy, blowing and drifting snow, and low temperatures, the engine cooling fan can become blocked or frozen with snow. the fan motor may not rotate and could overheat.
Consequencs:
This condition can cause smoke or flames from the fan and/or shroud, the fan electrical wiring, or the fan motor resulting in a vehicle fire.
Notes:
Dealers will install an electrical jumper harness containing an automatic resetting circuit breaker to protect the fan motor low speed circuitry from overheating.
Date: 11.10.1994
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Ford Motor Company
Description:
The retainer clip which holds the master cylinder push rod to the brake pedal arm is missing or not completely installed. the push rod can separate from the brake pedal arm.
Consequencs:
This can result in loss of braking ability and an accident.
Notes:
Dealers will inspect and, if necessary, install the retainer clip.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 25.11.1994
Component: Suspension > Front > Shock Absorber
Manufacturer: Monroe Auto Corp.
Description:
The arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.
Consequencs:
Over time, a portion of the bracket can tear away from the strut, falling into and puncturing the tire or causing damage to the wheel, which could result in an accident.
Notes:
Monroe dealers will replace the strut free of charge.
Date: 21.12.2001
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
Vehicle description: taurus/sable vehicles equipped with 3.0l and 3.8l engines and mustang vehicles with 3.8l and 5.0l engines. it is possible for the engine cooling fan bearing to seize.
Consequencs:
Should this occur, excessive heat could be generated which could melt the fan motor electrical connector. components inside the cooling fan motor could ignite potentially resulting in an underhood fire.
Notes:
Dealers will inspect the engine cooling fan assembly and install a circuit breaker. if the cooling fan is inoperative, the fan and motor assembly will be replaced. owner notification began december 28, 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-866-436-7332.
Date: 21.12.2001
Component: Engine And Engine Cooling > Cooling System > Fan
Manufacturer: Ford Motor Company
Description:
This is not a safety recall in accordance with the safety act. however, it is deemed a safety improvement campaign by the agency. vehicle description: 1995 taurus/sable passenger vehicles equipped with 3.0l and 3.8l engines and 1995 ford mustang vehicles with 3.8l and 5.0l engines. it is possible for the engine cooling fan bearing to seize.
Consequencs:
Should this occur, excessive heat could be generated which could melt the fan motor electrical connector. components inside the cooling fan motor could ignite potentially resulting in an underhood fire.
Notes:
Dealers will replace the engine cooling fan motor assembly at no charge to consumers. ford is extending the limited warranty on the engine cooling fan motor to a total of 8 years or 100,000 miles from the warranty start date, whichever occurs first. this coverage is automatically transferred to subsequent owners at no charge. if the vehicle already has more than 100,000 miles, this coverage will last until june 30, 2002. if the consumer has paid to have this service done before december 2001, ford is offering a refund. owners can contact ford at 1-866-436-7332, concerning this program.
