Date: 14.11.2003
Component: Electrical System > Ignition > Module
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.
Consequencs:
If one of the resistors inside the ecm has a crack on the surface coating, the gas may cause corrosion of the resistor. this could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Notes:
Dealers will remove the inside lining material from the ecm box. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261.
Date: 14.11.2003
Component: Electrical System > Ignition > Module
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.
Consequencs:
If one of the resistors inside the ecm has a crack on the surface coating, the gas may cause corrosion of the resistor. this could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Notes:
Dealers will remove the inside lining material from the ecm box. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261.
Date: 17.11.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
Consequencs:
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Notes:
Dealers will replace the crank position sensors. camshaft position sensor(s), and in some cases, the variable timing control sensor(s). vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. the replacement sensors used in that campaign are also affected. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261 or infiniti at 1-800-662-6200.
Date: 17.11.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
Consequencs:
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Notes:
Dealers will replace the crank position sensors. camshaft position sensor(s), and in some cases, the variable timing control sensor(s). vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. the replacement sensors used in that campaign are also affected. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261 or infiniti at 1-800-662-6200.
Date: 17.11.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
Consequencs:
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Notes:
Dealers will replace the crank position sensors. camshaft position sensor(s), and in some cases, the variable timing control sensor(s). vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. the replacement sensors used in that campaign are also affected. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261 or infiniti at 1-800-662-6200.
Date: 17.11.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
Consequencs:
This could cause the "service engine soon" warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation, which could result in a crash.
Notes:
Dealers will replace the crank position sensors. camshaft position sensor(s), and in some cases, the variable timing control sensor(s). vehicles involved in a previous recall campaign, 01v357, are also included in this new campaign. the replacement sensors used in that campaign are also affected. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261 or infiniti at 1-800-662-6200.
Date: 10.12.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line.
Consequencs:
Notes:
Dealers will replace the bracket on these vehicles. owner notification began december 15, 2003. owners should contact nissan at 1-800-647-7261.
Date: 10.12.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line.
Consequencs:
Notes:
Dealers will replace the bracket on these vehicles. owner notification began december 15, 2003. owners should contact nissan at 1-800-647-7261.
Date: 10.12.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line.
Consequencs:
Notes:
Dealers will replace the bracket on these vehicles. owner notification began december 15, 2003. owners should contact nissan at 1-800-647-7261.
Date: 15.02.2002
Component: Unknown Or Other
Manufacturer: Nissan North America, Inc.
Description:
On some passenger vehicles equipped with a nissan-approved accessory floor mat that was installed either at the assembly plant or by the dealer, due to the length of the driver side floor mat, a small amount of mat movement could cause the mat to interfere with the accelerator pedal and not allow the pedal to release after it is depressed.
Consequencs:
If this occurs unexpectedly, it could lead to a crash.
Notes:
Dealers will inspect the driver side floor mat and if it is a nissan floor mat subject to this recall, the dealer will replace both the driver and passenger side floor mats. owner notification began march 18, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261.
Date: 14.11.2007
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with a 2.5l engine, the crankshaft position sensor can overheat causing a brief interruption in the signal output from the sensor.
Consequencs:
If the interruption in the signal from the crankshaft position sensor is so brief that the electronic control module (ecm) logic does not have time to diagnose the condition, the engine may stop running without warning while the vehicle is driven at a low speed increasing the risk of a crash.
Notes:
Dealers will reprogram the ecm free of charge. certain my 2006 altimas which have been previously remedied under recall campaign 06v223 (nissan r0606) are not included in this recall since the reprogramming for 06v223 also included this reprogramming. the recall began on december 31, 2007. owners may contact nissan at 1-800-647-7261.
Date: 14.11.2003
Component: Electrical System > Ignition > Module
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.
Consequencs:
If one of the resistors inside the ecm has a crack on the surface coating, the gas may cause corrosion of the resistor. this could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Notes:
Dealers will remove the inside lining material from the ecm box. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261.
Date: 14.11.2003
Component: Electrical System > Ignition > Module
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.
Consequencs:
If one of the resistors inside the ecm has a crack on the surface coating, the gas may cause corrosion of the resistor. this could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Notes:
Dealers will remove the inside lining material from the ecm box. owner notification began on december 22, 2003. owners should contact nissan at 1-800-647-7261.
Date: 10.12.2003
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain electric vehicles, the front suspension transverse link's ball joint bracket may break from stress concentration at a notch created by surface roughness and the shape of the material cut-line.
Consequencs:
Notes:
Dealers will replace the bracket on these vehicles. owner notification began december 15, 2003. owners should contact nissan at 1-800-647-7261.
Date: 11.03.2003
Component: Engine And Engine Cooling > Exhaust System > Manifold/header/muffler/tail Pipe
Manufacturer: Nissan North America, Inc.
Description:
On certain vehicles equipped with the 2.5 liter engine, the exhaust pipe hanger pin may catch debris from the road that could be ignited by contact with the main catalyst. also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate.
Consequencs:
Either of these two conditions could result in a fire.
Notes:
Dealers will remove the protruding portion of the exhaust pipe hanger pin. in addition to the corrective action, in order to reduce the risk of fire in the event of poor or improper maintenance that could result in oil spillage, heat shield(s) will be installed on the pre-catalyst and exhaust tube. owner notification began on july 28, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261. nissan recall nos. r3007, r3014, r3015, r3016, r3017. also on 2002 altima and sentra vehicles, certain engine operating conditions may cause the pre-catalyst to overheat and damage the catalyst substrate. if substrate particles enter the combustion chamber, they could score the cylinder walls, resulting in increased oil consumption. if the engine oil level is not checked on a periodic basis and drops below the low level, and the driver continues to operate the vehicle ignoring noticeable engine noise, engine damage may occur which could result in a fire. the pre-catalyst will be tested to ensure it is working properly and replaced if necessary. if damage is found inside the pre-catalyst, it will be necessary to replace the engine.
Date: 12.04.2013
Component: Air Bags
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2001-2003 maxima and pathfinder; model year 2001 infiniti i30; model year 2002-2003 infiniti i35 and infiniti qx4; model year 2003 infiniti fx35 and fx45; and model year 2002-2003 sentra vehicles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. this recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. a replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequencs:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Notes:
Owners of all vehicles on which a defective air bag may have been installed either as original equipment, or as a replacement, will be notified. dealers will inspect vehicles, and where a defective air bag inflator is identified, the inflator will be replaced, free of charge. the recall began during august 2013. owners may contact nissan customer service at 1-800-647-7261.
Date: 12.04.2013
Component: Air Bags
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2001-2003 maxima and pathfinder; model year 2001 infiniti i30; model year 2002-2003 infiniti i35 and infiniti qx4; model year 2003 infiniti fx35 and fx45; and model year 2002-2003 sentra vehicles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. this recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. a replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequencs:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Notes:
Owners of all vehicles on which a defective air bag may have been installed either as original equipment, or as a replacement, will be notified. dealers will inspect vehicles, and where a defective air bag inflator is identified, the inflator will be replaced, free of charge. the recall began during august 2013. owners may contact nissan customer service at 1-800-647-7261.
Date: 24.06.2014
Component: Air Bags
Manufacturer: Nissan North America, Inc.
Description:
Nissan north america, inc. (nissan) is recalling certain model year 2002-2003 nissan maxima and infiniti i35 and qx4, as well as 2002-2004 nissan pathfinder and sentra and 2003 infiniti fx vehicles, to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. this recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. a replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequencs:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Notes:
Owners of all vehicles on which a defective air bag may have been installed either as original equipment, or as a replacement, will be notified. dealers will inspect vehicles, and where a defective air bag inflator is identified, the inflator will be replaced, free of charge. the recall is expected to begin august 11, 2014. owners may contact nissan customer service at 1-800-647-7261. note: this recall is an expansion of nhtsa recall no. 13v-136.
Date: 24.06.2014
Component: Air Bags
Manufacturer: Nissan North America, Inc.
Description:
Nissan north america, inc. (nissan) is recalling certain model year 2002-2003 nissan maxima and infiniti i35 and qx4, as well as 2002-2004 nissan pathfinder and sentra and 2003 infiniti fx vehicles, to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. this recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. a replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequencs:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Notes:
Owners of all vehicles on which a defective air bag may have been installed either as original equipment, or as a replacement, will be notified. dealers will inspect vehicles, and where a defective air bag inflator is identified, the inflator will be replaced, free of charge. the recall is expected to begin august 11, 2014. owners may contact nissan customer service at 1-800-647-7261. note: this recall is an expansion of nhtsa recall no. 13v-136.
Date: 24.06.2014
Component: Air Bags
Manufacturer: Nissan North America, Inc.
Description:
Nissan north america, inc. (nissan) is recalling certain model year 2002-2003 nissan maxima and infiniti i35 and qx4, as well as 2002-2004 nissan pathfinder and sentra and 2003 infiniti fx vehicles, to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. this recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. a replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.
Consequencs:
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.
Notes:
Owners of all vehicles on which a defective air bag may have been installed either as original equipment, or as a replacement, will be notified. dealers will inspect vehicles, and where a defective air bag inflator is identified, the inflator will be replaced, free of charge. the recall is expected to begin august 11, 2014. owners may contact nissan customer service at 1-800-647-7261. note: this recall is an expansion of nhtsa recall no. 13v-136.
Date: 07.07.2006
Component: Engine And Engine Cooling
Manufacturer: Nissan North America, Inc.
Description:
On certain passenger vehicles equipped with a 2.5l engine, the crank angle sensor is affected by temperature variations. under certain driving conditions, these variations in temperature can be large enough to cause a brief interruption in the signal output from the sensor.
Consequencs:
If the interruption in the signal from the sensor is so brief that the electronic control module (ecm) logic does not have time to diagnose the condition, the engine may stop running without warning while the vehicle is driven at a low speed increasing the risk of a crash.
Notes:
Dealers will reprogram the ecm free of charge. the recall began on august 21, 2006. owners may contact nissan at 1-800-647-7261.
