Report for VIN 4F2CU08162KM45848

Overview

VIN: 4F2CU08162KM45848
Make: Mazda
Model: TRIBUTE
Variant: LX 4WD
Year: 2002

Vehicle history

History records: Get history report
User messages: View / add messages (0)
Recalls: View recalls (17)
Complaints:
Service bulletins:

Junk, salvage, damages

Check for collision, salvage, junk, total-loss, fire, hail, flood, rebuild, thief, odometer rollbacks, odometer readings, etc. records:

Technical specification

Bodytype: Sport Utility
Doors: 4
Seats: 5
Engine ccm: 3000
Engine type: V6 DOHC 24V
Height (inch): 69.90
Width (inch): 71.90
Length (inch): 173.00
Steering: R&P
Anti-brake system: Non-ABS | 4-Wheel ABS

Tyres and wheels

Front Rear
7Jx15 ET37 (225/75 R15) 7Jx15 ET37 (225/75 R15)
7.5Jx16 ET37 (235/70 R16) 7.5Jx16 ET37 (235/70 R16)
7Jx16 ET45 (215/70 R16) 7Jx16 ET45 (215/70 R16)
7.5Jx16 ET42 (225/70 R16) 7.5Jx16 ET42 (225/70 R16)
8Jx17 ET38 (235/60 R17) 8Jx17 ET38 (235/60 R17); 7.5Jx17 ET42 (235/60 R17)
7.5Jx17 ET42 (225/65 R17) 7.5Jx17 ET42 (225/65 R17); 7.5Jx17 ET42 (225/65 R17)
8Jx18 ET38 (235/55 R18) 8Jx18 ET38 (235/55 R18); 7.5Jx18 ET42 (235/55 R18); 8Jx18 ET38 (235/55 R18); 7.5Jx18 ET42 (235/55 R18)
7.5Jx17 ET42 (235/60 R17) 7.5Jx17 ET42 (235/60 R17); 8Jx17 ET38 (235/60 R17)
7.5Jx17 ET42 (235/65 R17) 7.5Jx17 ET42 (235/65 R17); 8Jx17 ET38 (235/65 R17)
8Jx18 ET38 (255/55 R18) 8Jx18 ET38 (255/55 R18); 7.5Jx18 ET42 (255/55 R18)
8Jx18 ET38 (235/60 R18) 8Jx18 ET38 (235/60 R18); 7.5Jx18 ET42 (235/60 R18)
6.5Jx16 ET50 (215/70 R16) 6.5Jx16 ET50 (215/70 R16); 6.5Jx16 ET50 (215/70 R16)
7Jx16 ET45 (235/70 R16) 7Jx16 ET45 (235/70 R16)

Fuel economy

Tank size (gallon): 16.40
Highway Mileage (miles/gallon): 23
City Mileage (miles/gallon): 18

Other information

Model year:
Model period:
Manufacturer:
Place of assembly: UNITED STATES
Market:
WMI / VDS / VIS: 4F2 / CU0816 / 2KM45848
Sequential number: 45848
VIN checksum: Valid

Vehicle recalls

Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 20.01.2012
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. the brake master cylinder reservoir cap can leak brake fluid. if brake fluid leaks, it could come in contact with the antilock brake system (abs) module wiring harness connector.
Consequencs:
Corrosion may develop in the electrical connector leading melting, smoking or possible fire.
Notes:
Mazda will notify owners, and dealers will replace the vehicle's brake master cylinder reservoir cap and modify the abs electrical system, free of charge. until the repair has been performed, vehicle owners should park their vehicles outside. the safety recall began on june 22, 2012. owners may contact mazda at 1-800-222-5500, option 6.
Date: 20.01.2012
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. the brake master cylinder reservoir cap can leak brake fluid. if brake fluid leaks, it could come in contact with the antilock brake system (abs) module wiring harness connector.
Consequencs:
Corrosion may develop in the electrical connector leading melting, smoking or possible fire.
Notes:
Mazda will notify owners, and dealers will replace the vehicle's brake master cylinder reservoir cap and modify the abs electrical system, free of charge. until the repair has been performed, vehicle owners should park their vehicles outside. the safety recall began on june 22, 2012. owners may contact mazda at 1-800-222-5500, option 6.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
Date: 12.04.2006
Component: Seats > Front Assembly > Head Restraint
Manufacturer: Mazda Motor Corp
Description:
Certain sport utility vehicles equipped without side air curtains or moon roofs fail to comply with the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact." during testing, the free motion head form registered a measurement above the permitted limit at the left hand a-pillar trim area.
Consequencs:
In the event of a vehicle crash, personal injury to occupants may occur.
Notes:
Dealers will make modifications to the energy absorbing material located above the headliner in the affected area free of charge. the recall began on may 31, 2006. owners may contact mazda at 1-800-222-5500.
Show all recalls

Similar reports

Enter Your VIN and Get History Now:


Mazda TRIBUTE, 2002: list of valid VIN codes