Date: 15.12.2003
Component: Seat Belts > Front > Buckle Assembly
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, a post within the safety belt buckle covers could fracture, which could affect latch function, resulting in either a "no latch" or "partial latch" condition. in the "partial latch" condition, the buckle tongue can be inserted into the buckle and appear to be engaged, but will release from the buckle without the push button being depressed when a relatively low load is applied, such as when an occupant moves slightly in the seat.
Consequencs:
In the event of a crash, the seat occupant may not be properly restrained, increasing the risk of injury.
Notes:
Dealers will have the driver and front passenger safety belt buckle cover removed and replaced with a newly designed service buckle cover. owner notification began february 5, 2004. owners should contact mazda at 1-800-222-5500.
Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 09.04.2004
Component: Power Train > Automatic Transmission > Control Module (tcm, Pcm)
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles equipped with 3.0l v6 duratec engines , during deceleration, the engine can stall.
Consequencs:
Should the engine stall, a vehicle crash could occur.
Notes:
Dealers will reprogram the power control module (pcm) with the appropriate calibration. the recall began on may 3, 2004. owners should contact mazda at 1-800-222-5500.
Date: 20.01.2012
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. the brake master cylinder reservoir cap can leak brake fluid. if brake fluid leaks, it could come in contact with the antilock brake system (abs) module wiring harness connector.
Consequencs:
Corrosion may develop in the electrical connector leading melting, smoking or possible fire.
Notes:
Mazda will notify owners, and dealers will replace the vehicle's brake master cylinder reservoir cap and modify the abs electrical system, free of charge. until the repair has been performed, vehicle owners should park their vehicles outside. the safety recall began on june 22, 2012. owners may contact mazda at 1-800-222-5500, option 6.
Date: 20.01.2012
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. the brake master cylinder reservoir cap can leak brake fluid. if brake fluid leaks, it could come in contact with the antilock brake system (abs) module wiring harness connector.
Consequencs:
Corrosion may develop in the electrical connector leading melting, smoking or possible fire.
Notes:
Mazda will notify owners, and dealers will replace the vehicle's brake master cylinder reservoir cap and modify the abs electrical system, free of charge. until the repair has been performed, vehicle owners should park their vehicles outside. the safety recall began on june 22, 2012. owners may contact mazda at 1-800-222-5500, option 6.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 10.04.2007
Component: Service Brakes, Hydraulic > Antilock > Control Unit/module
Manufacturer: Mazda Motor Corp
Description:
On certain sport utility vehicles equipped with antilock brakes (abs), the abs module connector may have missing or dislodged wire seals. this condition could allow contamination to enter the module connector, creating a potential for an electrical short.
Consequencs:
An electrical short might cause an abs malfunction that would illuminate the abs warning light, and in some cases, the module may overheat resulting in burning odor, smoke, and/or fire. this condition could occur either when the vehicle ignition switch is in the off position or while the vehicle is being operated.
Notes:
Dealers will inspect the wire harness connector to the abs module for missing or dislodged wire seals, and repair or replace the harness connector as appropriate. the dealer will also inspect the connector on the abs module and replace it if it is found to be corroded or damaged. the recall began on may 9, 2007. owners may contact mazda at 1-800-222-5500.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 04.04.2014
Component: Structure > Frame And Members
Manufacturer: Mazda North American Operations
Description:
Mazda north american operations (mazda) is recalling certain model year 2001-2004 tribute vehicles manufactured may 22, 2000, through december 19, 2003, originally sold, or currently registered in, connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia. these vehicles may experience excessive corrosion at the forward attachment of the lower control arm.
Consequencs:
A separation of the lower control arm can result in a significant loss of steering control, increasing the risk of a crash.
Notes:
Mazda will notify owners, and dealers will install a newly designed reinforcement cross-brace, free of charge. the recall began on may 29, 2014. owners may contact mazda at 1-800-222-5500. mazda's number for this recall is 7514d.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
Date: 10.12.2004
Component: Vehicle Speed Control > Cables
Manufacturer: Mazda North American Operations
Description:
On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.
Consequencs:
An unexpected increase in engine idle speed may increase stopping distance and may result in a vehicle crash.
Notes:
Dealers will replace the accelerator cable. the recall began on january 28, 2005. owners should contact mazda at 1-800-222-5500, option #4.
