Date: 30.04.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: multi-purpose passenger vehicles equipped with 5.0l engines originally sold or currently registered in the states of alaska, idaho, iowa, maine, michigan (upper peninsula only), minnesota, montana, nebraska, new hampshire, new york, north dakota, south dakota, vermont, wisconsin, and wyoming. these vehicles, when operated for extended periods of time at highway speeds and temperatures below -20 degrees farenheit, do not return to idle due to ice in the throttle body.
Consequencs:
Although the vehicle can be controlled by either applying the service brakes or shifting the transmission to neutral, increased brake pedal efforts or some increase in stopping distance can result.
Notes:
Dealers will install a revised pcv system with water heated vacuum source.
Date: 30.04.1997
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: multi-purpose passenger vehicles equipped with 5.0l engines originally sold or currently registered in the states of alaska, idaho, iowa, maine, michigan (upper peninsula only), minnesota, montana, nebraska, new hampshire, new york, north dakota, south dakota, vermont, wisconsin, and wyoming. these vehicles, when operated for extended periods of time at highway speeds and temperatures below -20 degrees farenheit, do not return to idle due to ice in the throttle body.
Consequencs:
Although the vehicle can be controlled by either applying the service brakes or shifting the transmission to neutral, increased brake pedal efforts or some increase in stopping distance can result.
Notes:
Dealers will install a revised pcv system with water heated vacuum source.
Date: 27.12.2000
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: sport utility vehicles equipped with 4.0l sohc engines and still retain the original throttle body (part numbers 97jf-9e926ab or 97jf-9e926-ac). some of the original throttle bodies installed allowed a gap between the plate and bore to be built too narrow. this reduced clearance allowed the engine deposits normally present in the throttle body to contact or bridge the gap. if the engine deposits bridged the gap between the throttle plate and bore and then hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge.
Consequencs:
This could result in engine surge when the accelerator pedal breaks free.
Notes:
Dealers will replace the original throttle bodies.
Date: 27.12.2000
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Vehicle description: sport utility vehicles equipped with 4.0l sohc engines and still retain the original throttle body (part numbers 97jf-9e926ab or 97jf-9e926-ac). some of the original throttle bodies installed allowed a gap between the plate and bore to be built too narrow. this reduced clearance allowed the engine deposits normally present in the throttle body to contact or bridge the gap. if the engine deposits bridged the gap between the throttle plate and bore and then hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge.
Consequencs:
This could result in engine surge when the accelerator pedal breaks free.
Notes:
Dealers will replace the original throttle bodies.
Date: 19.03.1998
Component: Fuel System, Gasoline > Delivery > Hoses, Lines/piping, And Fittings
Manufacturer: Ford Motor Company
Description:
Vehicle description: multi-purpose passenger vehicles equipped with 4.0l single overhead cam engines. the engine fuel lines can be damaged if the vehicle is jump started and the ground cable is attached to the fuel line bracket that is located near the battery. since the bracket is not grounded, the stainless steel fuel line braid could act as a ground potentially overheating the ptfe inner liner of the fuel line resulting in damage to the fuel line.
Consequencs:
The fuel lines can leak, and in the presence of an ignition source, a fire could potentially result.
Notes:
Dealers will install a warning label on the fuel line bracket advising owners not to use it for a jump start ground. also a revised bolt will be installed in the alternator bracket to provide a convenient jump start ground location.
Date: 19.03.1998
Component: Fuel System, Gasoline > Delivery > Hoses, Lines/piping, And Fittings
Manufacturer: Ford Motor Company
Description:
Vehicle description: multi-purpose passenger vehicles equipped with 4.0l single overhead cam engines. the engine fuel lines can be damaged if the vehicle is jump started and the ground cable is attached to the fuel line bracket that is located near the battery. since the bracket is not grounded, the stainless steel fuel line braid could act as a ground potentially overheating the ptfe inner liner of the fuel line resulting in damage to the fuel line.
Consequencs:
The fuel lines can leak, and in the presence of an ignition source, a fire could potentially result.
Notes:
Dealers will install a warning label on the fuel line bracket advising owners not to use it for a jump start ground. also a revised bolt will be installed in the alternator bracket to provide a convenient jump start ground location.
Date: 13.10.2009
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 f-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). the scds may leak internally and then overheat, smoke, or burn.
Consequencs:
A vehicle fire could occur with or without the engine running.
Notes:
Ford will notify owners that dealers will install a fused wiring harness in line with the scds. on 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the abs control module connector and repair as necessary. repairs will be completed free of charge. the safety recall began on october 27, 2009. owners may contact ford at 1-888-222-2751.
Date: 13.10.2009
Component: Vehicle Speed Control
Manufacturer: Ford Motor Company
Description:
Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 f-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). the scds may leak internally and then overheat, smoke, or burn.
Consequencs:
A vehicle fire could occur with or without the engine running.
Notes:
Ford will notify owners that dealers will install a fused wiring harness in line with the scds. on 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the abs control module connector and repair as necessary. repairs will be completed free of charge. the safety recall began on october 27, 2009. owners may contact ford at 1-888-222-2751.
Date: 29.06.1999
Component: Latches/locks/linkages > Hood > Latch
Manufacturer: Ford Motor Company
Description:
Vehicle description: sport utility vehicles. the secondary hood latch may corrode at the latch pivot and stick in the open position.
Consequencs:
If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up could occur.
Notes:
Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection.
Date: 29.06.1999
Component: Latches/locks/linkages > Hood > Latch
Manufacturer: Ford Motor Company
Description:
Vehicle description: sport utility vehicles. the secondary hood latch may corrode at the latch pivot and stick in the open position.
Consequencs:
If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up could occur.
Notes:
Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection.
Date: 05.08.2003
Component: Seats > Front Assembly > Recliner
Manufacturer: Ford Motor Company
Description:
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. if the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Consequencs:
The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
Notes:
Dealers will replace the driver seat upper bolt with a metal spacer and bolt. in addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. owner notification began on august 29, 2003. owners should contact ford at 1-800-392-3673.
Date: 05.08.2003
Component: Seats > Front Assembly > Recliner
Manufacturer: Ford Motor Company
Description:
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. if the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Consequencs:
The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
Notes:
Dealers will replace the driver seat upper bolt with a metal spacer and bolt. in addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. owner notification began on august 29, 2003. owners should contact ford at 1-800-392-3673.
Date: 05.08.2003
Component: Seats > Front Assembly > Recliner
Manufacturer: Ford Motor Company
Description:
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. if the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Consequencs:
The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
Notes:
Dealers will replace the driver seat upper bolt with a metal spacer and bolt. in addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. owner notification began on august 29, 2003. owners should contact ford at 1-800-392-3673.
Date: 05.08.2003
Component: Seats > Front Assembly > Recliner
Manufacturer: Ford Motor Company
Description:
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. if the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Consequencs:
The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
Notes:
Dealers will replace the driver seat upper bolt with a metal spacer and bolt. in addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. owner notification began on august 29, 2003. owners should contact ford at 1-800-392-3673.
