Date: 24.05.2004
Component: Air Bags
Manufacturer: Bayerische Motoren Werke
Description:
On certain passenger vehicles, incompatible electronic air bag system processors may have been installed.
Consequencs:
In the event of a crash, air bag deployment may not occur, increasing the risk of injuries to the driver and/or front passenger.
Notes:
Dealers will inspect and, if necessary, replace the air bag system processors. the recall began june 11, 2004. owners should contact bmw at 1-800-831-1117.
Date: 12.04.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Bayerische Motoren Werke
Description:
On certain passenger vehicles, under certain environmental conditions, a vapor lock in the fuel pump could occur causing the engine to stall. if this were to happen, the engine would not be able to be restarted for approximately 15 to 20 minutes.
Consequencs:
If stalling were to occur, the driver would be unable to maintain vehicle speed or accelerate, increasing the risk of a crash.
Notes:
Dealers will install a resistor in the electrical line powering the fuel pump in order to prevent an occurrence of vapor lock. the recall began may 11, 2004. owners should contact bmw at 1-800-831-1117.
Date: 12.04.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Bayerische Motoren Werke
Description:
On certain passenger vehicles, under certain environmental conditions, a vapor lock in the fuel pump could occur causing the engine to stall. if this were to happen, the engine would not be able to be restarted for approximately 15 to 20 minutes.
Consequencs:
If stalling were to occur, the driver would be unable to maintain vehicle speed or accelerate, increasing the risk of a crash.
Notes:
Dealers will install a resistor in the electrical line powering the fuel pump in order to prevent an occurrence of vapor lock. the recall began may 11, 2004. owners should contact bmw at 1-800-831-1117.
Date: 09.06.2003
Component: Tires
Manufacturer: Bayerische Motoren Werke
Description:
On certain vehicles equipped with 18" tires, it is possible that the tire has been damaged during the mounting process to the rim.
Consequencs:
Consequently, a loss of tire pressure, or a tire failure, could occur. depending on traffic conditions and the driver's reactions, this could lead to a crash.
Notes:
Dealers will unseat the tire from its rim, inspect for any damage, and then reseat the tire to its rim. if inspection reveals that a front tire has incurred damage during the mounting process, it will be replaced. owner notification began july 14, 2003. owners should contact bmw at 1-800-831-1117.
