Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.03.2010
Component: Fuel System, Other > Storage > Fuel Gauge System
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2005-2009 titan, armada, and infiniti qx56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank is empty.
Consequencs:
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Notes:
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 03.07.2007
Component: Equipment
Manufacturer: Hopkins Manufacturing Corp.
Description:
Certain hopkins aftermarket trailer brake control connection harnesses sold for use on certain models of nissan vehicles which are listed above. the internal part numbers within hopkins are: 1010476025, 1040376025, 1110476025, 1170376025, 1290376025, 1010476035, 1040376035, 1110476035, 1170376035, and 1290376035. a wire may have been placed in an incorrect position in the electrical connector housing. this results in an incorrect routing of wires between the trailer brake controller and the towing vehicle wiring system.
Consequencs:
This harness would result in power from the trailer brake controller going to the towing vehicle dash light circuit rather than the trailer brakes. this result would be the lack of trailer braking when the towing vehicle brakes were applied. it would also result in the towing vehicles dash lights being activated when the vehicle brakes were applied. the failure of the application of the trailer brake could result in reduced ability to stop and contribute to a possible crash.
Notes:
Hopkins will notify owners and replace the original harness with a revised harness free of charge. the recall began august 17, 2007. owners can contact hopkins at 800-835-0129.
Date: 25.09.2007
Component: Seat Belts > Rear
Manufacturer: Nissan North America, Inc.
Description:
Certain sport utility vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 210, 'seat belt assembly anchorages.' the driver's side third row seat belt upper anchor bracket may be cracked.
Consequencs:
In the event of a crash, a seat occupant may not be properly restrained increasing the risk of personal injury.
Notes:
Dealers will replace the seat belt bracket free of charge. the recall began on november 1, 2007. owners may contact nissan at 1-800-647-7261.
Date: 25.09.2007
Component: Seat Belts > Rear
Manufacturer: Nissan North America, Inc.
Description:
Certain sport utility vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 210, 'seat belt assembly anchorages.' the driver's side third row seat belt upper anchor bracket may be cracked.
Consequencs:
In the event of a crash, a seat occupant may not be properly restrained increasing the risk of personal injury.
Notes:
Dealers will replace the seat belt bracket free of charge. the recall began on november 1, 2007. owners may contact nissan at 1-800-647-7261.
Date: 22.07.2010
Component: Air Bags > Side/window
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling model year 2008 nissan armada and infiniti qx56 vehicles manufactured from february 7, 2007 through february 14, 2007. these vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 201, "protection in interior impact." an out-of-specification a-pillar finisher might impede the correct inflation of the side curtain air bag near the upper portion of the b-pillar.
Consequencs:
Incorrect inflation of the side curtain air bag may increase the risk of injury to a vehicle occupant in the event of a crash requiring deployment of that air bag.
Notes:
Dealers will replace both right and left front pillar finishers free of charge. the safety recall began on august 16, 2010. owners may contact nissan at 1-800-647-7261.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Date: 02.03.2010
Component: Service Brakes, Hydraulic > Pedals And Linkages
Manufacturer: Nissan North America, Inc.
Description:
Nissan is recalling certain model year 2008-2010 titan, armada, and infiniti qx56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal bracket.
Consequencs:
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Notes:
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
