Date: 02.10.2000
Component: Power Train > Automatic Transmission
Manufacturer: Nissan North America, Inc.
Description:
Vehicle description: pickup trucks and sport utility vehicles equipped with automatic transmissions fail to comply with the requirements of fmvss no. 102, "transmission shift lever sequence, starter interlock, and transmission braking effect. " these vehicles could have a shift cable lock plate that is too brittle and can break. the gear shift lever and the "prndl" indicator may move, but the transmission will not shift out of the park position. over a period of time, the transmission could shift out of the park position, but the gear indicated on the display may differ from the gear engaged in the transmission.
Consequencs:
If the driver selects 'drive' and the transmission is actually in 'reverse', a vehicle crash could occur.
Notes:
Dealers will replace the automatic transmission shift cable lock plate.
Date: 22.08.2003
Component: Wheels
Manufacturer: Nissan North America, Inc.
Description:
2000 nissan xterra vehicles manufactured between october 15, 1999, and february 29, 2000. the alloy wheels used on these vehicles may not have been properly manufactured and could develop cracks in the wheel spokes.
Consequencs:
If a sufficient number of spoke cracks develop, the wheel could fail and separate from the mounting hub, possibly resulting in a vehicle crash without prior warning.
Notes:
Nissan will notify its customers and replace the four alloy wheels with xterra se model bright alloy wheels free of charge. the spare tire steel wheel is not affected. owner notification began on september 15, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261. information can also be obtained through nissan's web site at www.nissanusa.com.
Date: 24.05.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks equipped with six cylinder engines and sport utility vehicles equipped with four or six cylinder engines, the fuel pump terminal on the fuel-sending unit can develop a crack in the plastic molding. this can cause the terminal strip to corrode under some environmental conditions.
Consequencs:
If corrosion occurs, the terminal strip could eventually break causing the fuel pump to stop operation. this will result in not being able to start the engine or cause the engine to stop running without warning, which can result in a crash.
Notes:
In the following states, dealers will replace the fuel-sending unit. these states are connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia, wisconsin, and the district of columbia. in the other states, the dealer will inspect the fuel pump terminal on the sending unit for corrosion. if corrosion is present, the dealer will replace the unit. if there is not corrosion, the dealer will apply sealant to the terminal housing to help prevent corrosion in the future. owner notification began on june 28, 2004. owners should contact nissan at 1-800-647-7261.
Date: 24.05.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks equipped with six cylinder engines and sport utility vehicles equipped with four or six cylinder engines, the fuel pump terminal on the fuel-sending unit can develop a crack in the plastic molding. this can cause the terminal strip to corrode under some environmental conditions.
Consequencs:
If corrosion occurs, the terminal strip could eventually break causing the fuel pump to stop operation. this will result in not being able to start the engine or cause the engine to stop running without warning, which can result in a crash.
Notes:
In the following states, dealers will replace the fuel-sending unit. these states are connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia, wisconsin, and the district of columbia. in the other states, the dealer will inspect the fuel pump terminal on the sending unit for corrosion. if corrosion is present, the dealer will replace the unit. if there is not corrosion, the dealer will apply sealant to the terminal housing to help prevent corrosion in the future. owner notification began on june 28, 2004. owners should contact nissan at 1-800-647-7261.
Date: 24.05.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks equipped with six cylinder engines and sport utility vehicles equipped with four or six cylinder engines, the fuel pump terminal on the fuel-sending unit can develop a crack in the plastic molding. this can cause the terminal strip to corrode under some environmental conditions.
Consequencs:
If corrosion occurs, the terminal strip could eventually break causing the fuel pump to stop operation. this will result in not being able to start the engine or cause the engine to stop running without warning, which can result in a crash.
Notes:
In the following states, dealers will replace the fuel-sending unit. these states are connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia, wisconsin, and the district of columbia. in the other states, the dealer will inspect the fuel pump terminal on the sending unit for corrosion. if corrosion is present, the dealer will replace the unit. if there is not corrosion, the dealer will apply sealant to the terminal housing to help prevent corrosion in the future. owner notification began on june 28, 2004. owners should contact nissan at 1-800-647-7261.
Date: 24.05.2004
Component: Fuel System, Gasoline > Delivery > Fuel Pump
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks equipped with six cylinder engines and sport utility vehicles equipped with four or six cylinder engines, the fuel pump terminal on the fuel-sending unit can develop a crack in the plastic molding. this can cause the terminal strip to corrode under some environmental conditions.
Consequencs:
If corrosion occurs, the terminal strip could eventually break causing the fuel pump to stop operation. this will result in not being able to start the engine or cause the engine to stop running without warning, which can result in a crash.
Notes:
In the following states, dealers will replace the fuel-sending unit. these states are connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia, wisconsin, and the district of columbia. in the other states, the dealer will inspect the fuel pump terminal on the sending unit for corrosion. if corrosion is present, the dealer will replace the unit. if there is not corrosion, the dealer will apply sealant to the terminal housing to help prevent corrosion in the future. owner notification began on june 28, 2004. owners should contact nissan at 1-800-647-7261.
Date: 12.11.2002
Component: Fuel System, Gasoline > Storage > Tank Assembly > Filler Pipe And Cap
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks and sport utility vehicles, the fuel tank inlet shutter valve does not meet the sealing performance specification.
Consequencs:
Under certain conditions such as high ambient temperature and when winter grade gasoline is being sold, fuel could spill from the filler inlet as the tank is being filled. in the presence of an ignition source, fuel leakage could result in a fire.
Notes:
Dealers will replace the fuel tank inlet shutter valve. owner notification is expected to begin december 10, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261.
Date: 12.11.2002
Component: Suspension > Rear
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks and sport utility vehicles, water may enter the rear axle housing due to inadequate sealing of the anti-lock braking system (abs) sensor.
Consequencs:
This can result in corrosion and eventual failure of the wheel bearing. if this occurs, the wheel assembly could separate from the vehicle increasing the risk of a crash.
Notes:
Dealers will inspect the rear axle for water intrusion and any affected components will be replaced. the abs sensor will be resealed to prevent water intrusion. owner notification began december 10, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261.
Date: 12.11.2002
Component: Suspension > Rear
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks and sport utility vehicles, water may enter the rear axle housing due to inadequate sealing of the anti-lock braking system (abs) sensor.
Consequencs:
This can result in corrosion and eventual failure of the wheel bearing. if this occurs, the wheel assembly could separate from the vehicle increasing the risk of a crash.
Notes:
Dealers will inspect the rear axle for water intrusion and any affected components will be replaced. the abs sensor will be resealed to prevent water intrusion. owner notification began december 10, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261.
Date: 12.11.2002
Component: Suspension > Rear
Manufacturer: Nissan North America, Inc.
Description:
On certain pickup trucks and sport utility vehicles, water may enter the rear axle housing due to inadequate sealing of the anti-lock braking system (abs) sensor.
Consequencs:
This can result in corrosion and eventual failure of the wheel bearing. if this occurs, the wheel assembly could separate from the vehicle increasing the risk of a crash.
Notes:
Dealers will inspect the rear axle for water intrusion and any affected components will be replaced. the abs sensor will be resealed to prevent water intrusion. owner notification began december 10, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact nissan at 1-800-647-7261.
