Date: 15.06.2009
Component: Equipment > Other > Labels
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Consequencs:
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Notes:
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Date: 15.06.2009
Component: Equipment > Other > Labels
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Consequencs:
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Notes:
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Date: 15.06.2009
Component: Equipment > Other > Labels
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Consequencs:
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Notes:
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Date: 04.09.2013
Component: Hybrid Propulsion System > Inverter
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2006-2010 highlander hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. the intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. if this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequencs:
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. it is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Notes:
Toyota will notify owners, and dealers will replace the ipm free of charge. owners may contact toyota at 1-800-331-4331. vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.
Date: 04.09.2013
Component: Hybrid Propulsion System > Inverter
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2006-2010 highlander hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. the intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. if this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequencs:
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. it is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Notes:
Toyota will notify owners, and dealers will replace the ipm free of charge. owners may contact toyota at 1-800-331-4331. vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.
Date: 04.09.2013
Component: Hybrid Propulsion System > Inverter
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2006-2010 highlander hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. the intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. if this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequencs:
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. it is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Notes:
Toyota will notify owners, and dealers will replace the ipm free of charge. owners may contact toyota at 1-800-331-4331. vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.
Date: 04.09.2013
Component: Hybrid Propulsion System > Inverter
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2006-2010 highlander hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. the intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. if this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequencs:
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. it is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Notes:
Toyota will notify owners, and dealers will replace the ipm free of charge. owners may contact toyota at 1-800-331-4331. vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.
Date: 04.09.2013
Component: Hybrid Propulsion System > Inverter
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2006-2010 highlander hybrid vehicles manufactured february 16, 2005, through july 29, 2010; and model year 2006-2008 lexus rx400h vehicles manufactured february 23, 2005, through december 2, 2008. the intelligent power module (ipm) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. if this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequencs:
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. it is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Notes:
Toyota will notify owners, and dealers will replace the ipm free of charge. owners may contact toyota at 1-800-331-4331. vehicles that had their ipm replaced under recall 11v-342 are not affected by this campaign.
Date: 21.04.2011
Component: Air Bags
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling certain model year 2008 highlander, highlander hybrid, and model year 2007-2008 rav4 vehicles. in the curtain shield airbag (csa) system, there are two sensors in the airbag sensor assembly which are designed to detect vehicle roll angle. if one of these sensors malfunctions, the airbag warning light (malfunction indicator light: mil) will illuminate and the roll detection system will be suspended; however, the airbag csa remains available in the event of a side crash. if both sensors fail nearly simultaneously after initial airbag system check, the csa and the seat belt pretensioner could be inadvertently activated.
Consequencs:
Inadvertent activation of the csa and/or the seat belt pretensioner can cause injury to a vehicle occupant.
Notes:
Toyota will replace the airbag sensor assembly with a new one containing improved roll rate sensors, free of charge. toyota intends to send an interim owner notification to owners early to mid-may, 2011 when sufficient parts and remedy becomes available. owners may contact toyota at 1-800-331-4331.
Date: 21.04.2011
Component: Air Bags > Side/window
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling certain model year 2008 highlander, highlander hybrid, and model year 2007-2008 rav4 vehicles. in the curtain shield airbag (csa) system, there are two sensors in the airbag sensor assembly which are designed to detect vehicle roll angle. if one of these sensors malfunctions, the airbag warning light (malfunction indicator light: mil) will illuminate and the roll detection system will be suspended; however, the airbag csa remains available in the event of a side crash. if both sensors fail nearly simultaneously after initial airbag system check, the csa and the seat belt pretensioner could be inadvertently activated.
Consequencs:
Inadvertent activation of the csa and/or the seat belt pretensioner can cause injury to a vehicle occupant.
Notes:
Toyota will replace the airbag sensor assembly with a new one containing improved roll rate sensors, free of charge. toyota intends to send an interim owner notification to owners early to mid-may, 2011 when sufficient parts and remedy becomes available. owners may contact toyota at 1-800-331-4331.
Date: 18.04.2008
Component: Seat Belts > Rear
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling 90,189 my 2008 highlander and highlander hybrid passenger vehicles equipped with a third row seat. these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." the non-driver designated seating positions (dsp) on these vehicles is equipped with seat belt assemblies that have a feature that converts the retractor from an emergency locking retractor (elr) to an automatic locking retractor (alr). the belts convert to the alr mode after the webbing has been fully withdrawn from the retractor. the system is designed so that as the belt is released into the retractor, the system remains in the alr mode so that a child restraint system (crs) can be tightly secured.
Consequencs:
However, for the two third row dsp's on these vehicles, the alr mode deactivates before the webbing is fully retracted, so that it will not lock when certain rear-facing crs's that have a short seat belt routing path are installed in the vehicle. this can allow the seat belt webbing to spool out during normal driving maneuvers, which could affect the stability of a child restraint installed at those seating positions. as such, this could discourage the use of a child restraint and in the event of a crash, the child may not be adequately protected possibly resulting in injury.
Notes:
Dealers will install a newly designed seat belt component free of charge. the recall is expected to begin on or about december 18, 2008. owners may contact toyota at 1-800-331-4331.
Date: 27.04.2009
Component: Equipment
Manufacturer: Toyota Motor North America, Inc.
Description:
Toyota is recalling 39,100 stainless steel exhaust tips sold by toyota as an optional accessory for use on my 2008 highlander and highlander hybrid vehicles. due to improper heat treatment during the manufacturing process, the original clamp used to secure the toyota stainless steel exhaust tip to the exhaust pipe may develop microscopic cracks. eventually the crack may expand causing the clamp to break.
Consequencs:
The original clamp and the toyota stainless steel exhaust tip may fall off the vehicle's exhaust pipe and become a road hazard which would increase the risk of a vehicle crash.
Notes:
Toyota will notify owners and replace the clamp free of charge. the safety recall began on may 4, 2009. owners may contact toyota customer experience center at 1 888-270-9371 monday through friday, 5:00 am to 6:00 pm, saturday 7:00 am through 4:00 pm pacific time.
Date: 10.10.2012
Component: Visibility > Power Window Devices And Controls
Manufacturer: Toyota Motor Engineering & Manufacturing
Description:
Toyota is recalling certain model year 2007-2009 camry, camry hybrid, rav4, corolla, corolla matrix, tundra, sequoia, highlander, highlander hybrid, yaris, scion xb, scion xd and pontiac vibe vehicles. the power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
Consequencs:
If the switch overheats, it may melt, possibly resulting in a fire.
Notes:
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their toyota dealer or the toyota customer experience center at 1-800-331-4331. general motors will contact the pontiac vibe owners affected by this recall and gm dealers will inspect and repair switches as necessary. those owners may contact pontiac customer care at 1-800-762-2737.
Date: 16.01.2013
Component: Air Bags > Frontal > Sensor/control Module
Manufacturer: Southeast Toyota Distributors, Llc
Description:
Southeast toyota distributors, llc (set) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 tacoma, 4runner, camry, camry hybrid, prius, and rav4; model year 2009-2010 avalon, fj cruiser, and highlander hybrid; model year 2010-2013 model year corolla, sienna and tundra; model year 2009-2013 highlander and venza; model year 2012 prius v; and model year 2010-2012 sequoia. during modification by set to include accessories such as leather seat covers, seat heaters or headrest dvd systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. without passing the calibration test, the occupant sensing system may not operate as designed.
Consequencs:
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. this could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Notes:
Southeast toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. the recall began on march 21, 2013. owners may contact southeast toyota at 1-800-301-6859.
Date: 16.01.2013
Component: Seats
Manufacturer: Southeast Toyota Distributors, Llc
Description:
Southeast toyota distributors, llc (set) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 tacoma, 4runner, camry, camry hybrid, prius, and rav4; model year 2009-2010 avalon, fj cruiser, and highlander hybrid; model year 2010-2013 model year corolla, sienna and tundra; model year 2009-2013 highlander and venza; model year 2012 prius v; and model year 2010-2012 sequoia. during modification by set to include accessories such as leather seat covers, seat heaters or headrest dvd systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. without passing the calibration test, the occupant sensing system may not operate as designed.
Consequencs:
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. this could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Notes:
Southeast toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. the recall began on march 21, 2013. owners may contact southeast toyota at 1-800-301-6859.
Date: 16.01.2013
Component: Air Bags > Frontal > Sensor/control Module
Manufacturer: Southeast Toyota Distributors, Llc
Description:
Southeast toyota distributors, llc (set) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 tacoma, 4runner, camry, camry hybrid, prius, and rav4; model year 2009-2010 avalon, fj cruiser, and highlander hybrid; model year 2010-2013 model year corolla, sienna and tundra; model year 2009-2013 highlander and venza; model year 2012 prius v; and model year 2010-2012 sequoia. during modification by set to include accessories such as leather seat covers, seat heaters or headrest dvd systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. without passing the calibration test, the occupant sensing system may not operate as designed.
Consequencs:
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. this could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Notes:
Southeast toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. the recall began on march 21, 2013. owners may contact southeast toyota at 1-800-301-6859.
Date: 16.01.2013
Component: Seats
Manufacturer: Southeast Toyota Distributors, Llc
Description:
Southeast toyota distributors, llc (set) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 tacoma, 4runner, camry, camry hybrid, prius, and rav4; model year 2009-2010 avalon, fj cruiser, and highlander hybrid; model year 2010-2013 model year corolla, sienna and tundra; model year 2009-2013 highlander and venza; model year 2012 prius v; and model year 2010-2012 sequoia. during modification by set to include accessories such as leather seat covers, seat heaters or headrest dvd systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. without passing the calibration test, the occupant sensing system may not operate as designed.
Consequencs:
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. this could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Notes:
Southeast toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. the recall began on march 21, 2013. owners may contact southeast toyota at 1-800-301-6859.
